Wireless Communications

AWUS050NH IEEE 802.11a/b/g/n Wireless USB adapter provides users to launch 802.11a/b/g/n wireless network at 150/300 Mbps in the 2.4GHz/5.8GHz band, which is also compatible with 802.11a/b/g wireless devices at 11/54 Mbps. You can configure AWUS050NH with ad-hoc mode to connect to other 2.4GHz/5.8GHz wireless computers, or with Infrastructure mode to connect to a wireless AP or router for accessing to Internet. Feature : Compatible with IEEE 802.11n draft 3.0, 802.11a/b/g wireless standards 2.4GHz and 5.8GHz frequency band, MIMO (Multiple Input Multiple Output) Complies with Universal Serial Bus Rev. 2.0 specifications High speed transfer TX data rate up to 150 Mbps High speed transfer RX data rate up to 300 Mbps Supports WPS by S/W Supports wireless data encryption with 64/128-bit WEP, WPA, WPA2, TKIP, AES Wide Range coverage Compliant with FCC Part 15.247 for US, ETS 300 328 for Europe Supports driver for Windows 2000, XP 32/64, Vista 32/64, Linux (2.4.x/2.6.x), Mac (10...

Wireless-G high power with SMA Adapter (2dBi or 5dBi Antenna) IEEE 802.11g/b, WPA/WPA2 Compliant, Attachable Antenna Feature : Connects at a full 54Mbps via USB 2.0, up to 8 times faster than a USB 1.1 adapter High gain upgradeable Compact size for greater flexibility Also compatible with USB 1.1 desktop and notebook computers Plug-and-Play Compatible with windows 98SE, 2000, Millennium, XP and Linux High security 64/128/256bit WEP Encryption, TKIP, WPA, 802.11 Specification : Model AWUS036H Standards Wireless: IEEE 802.11b/g USB 2.0 standard Data Rate 802.11b: UP to 11Mbps 802.11g: 54Mbps OS Supported Windows 98SE, Windows ME, Windows 2000, Windows XP, Linux 2.6, Mac 10.4 Interface USB 2.0 mini USB Antenna Type 1 x 2.4Ghz SMA connector Chipset Realtek 8187L One LED Power/Status, Wireless Act. Frequency Range 2412~2462 MHz (N.A) 2412~2472 MHz (EU) 2412~2484 MHz (Japan) Channel 1~11 channels ( North America ) 1~13 channels ( General Europe) 1~14 channels (Japan) Emis...

AWUS036NH is the IEEE 802.11b/g/n Wireless USB adapter provides users to launch IEEE 802.11b/g/n wireless network at 150 Mbps in the 2.4GHz band, which is also compatible with IEEE 802.11b/g wireless devices at 54 Mbps. You can configure AWUS036NH with ad-hoc mode to connect to other 2.4GHz wireless computers, or with Infrastructure mode to connect to a wireless AP or router for accessing to Internet. AWUS036NH includes a convenient Utility for scanning available networks and saving preferred networks that users usually connected with. Security encryption can also be configured by this utility. Feature : Compatible with IEEE 802.11n, 802.11b/g/n wireless standards 2.4GHz frequency band, MIMO (Multiple Input Multiple Output) Complies with Universal Serial Bus Rev. 2.0 specifications High speed transfer TX data rate up to 150 Mbps Supports WPS by S/W Supports wireless data encryption with 64/128-bit WEP, WPA, WPA2, TKIP, AES Wide Range coverage Compliant with FCC Part 15.247 fo...

Alfa AWUS036H 1000mW USB Wireless Adapter w/ threaded RP-SMA Jack & Antenna: Best Long-distance USB WiFi Adapter for 802.11G wireless networks This is the latest version of Alfa sku AWUS036H: It was formerly designated as a 500mW device and now Alfa is claiming that the specification is 1000mW (1-watt): However, in our tests of this latest version against the previous (500mW) version, we find an improvement in signal strength of approximately 7% vs. the previous (500mW) version. This wireless adapter's 500mW Tx/Rx power compared to Tx/Rx power of popular wireless card models: 20xthe Tx/Rx power of LinkSys WPC11, which has 25mW 1.67x the Tx/Rx power of the most powerful PCMCIA wireless card:Ubiquiti 300mW SECURITY: WEP 64-bit, 128-bit, and 256-bit; WPA, WPA2 Easy installation and hot-plugging - flexibility and convenience of USB connections. Quickly and easily connect to wireless network with minimal install timeand effort. In new retail BOX, with CD-ROM with User Manual, dr...

Download Links http://download.wifislax.com:8080/wifiway-1-final.iso http://download.wifislax.com:8080/wifiway-1-final.iso.md5 Kernel Wifiway has been adapdet to start in 'LiveUSB' and optimitzed with the tecnology SMP. This tecnology improves the system speed if you have new processors like dual core ieee80211 drivers Ralink USB rt2570 Ralink PCI rt2500 Ralink rt61, if you want load this, you must load with his launcher, you can find this in the menu of drivers Ralink USB rt73 Atheros madwifi-hal Intel pro wireless ipw2200 Realtek r8187 Intel pro wireless 3945, ipwraw old, If you want load ipwraw-old, also you have to load with his launcher mac80211 drivers Zydas zd1211rw-mac80211 Intel pro wireless iwlagn, wifiway has the newest firmware to iwl4965 and iwl5x00, It's the first LiveCD that includes these drivers natively Intel pro wireless iwl3945, theese are been loaded default. Broadcom b43 y b43legacy Also, we have put more drivers in /opt/drivers. If you want use them, ...

Linksys WUSB54GC v3 (RT2800U ) Modem Specifications Manufacturer: Ralink Technology, Corp. Features: WLAN Max Communication Protocol: 802.11b 802.11g 802.11n Communication Buses: USB Wireless: ISM OS Platforms: Apple Mac OS X Linux k 2.4 Linux k 2.6 Windows 2000 Windows Vista Windows Vista 64-Bit Windows XP Windows XP 64-Bit Chipset: Manufacturer: Ralink Technology, Corp. Family Type: 802.11 WLAN MAC-Controller Family: RT2800U 11bgn WLAN Name: RT2800U 11bgn WLAN USB2 Hardware IDs: BABT: FCC: EEPROM ID: USB\VID_148F&PID_2870

NOTE: - Editing and creating files described, must be done carefully. - Check the difference in formatting characters (quotes '' “­­) when you copy&paste. - Tested on Ubuntu Jaunty with Kernel 2.6.28-17-generic (not tested on Ubuntu Karmic or Kernel above 2.6.28) ­- The frequency of 5.0 GHz is not supported by chipset used by this model of ALFA card. With mac­80211 drivers the limit of EIRP is set automatically by CRDA, for set/increase the full TX power You can choose only one of these two different options to change your default Country. - FIRST OPTION ­- Shortcuts for set automatically CRDA and enables to 2.4 GHz and 5.0 GHz of 30 dBm with one command line ­- If you use more than one wireless card is convenient to change automatically the CRDA when you need and only for your ALFA card. ­- To simplify and not permanently change the default data, I suggest using this method: Create new file: Code: sudo gedit /usr/local/bin/crda_change Copy&paste this text: Code: #!/bin...

Installing driver r8187 NOTE: Do not make any changes to the package/driver. (is already changed) IMPORTANT NOTE:Ref. ALFA-AWUS036H + r8187/Stacks-ieee80211 on Ubuntu Karmic - - The driver r8187/Stacks-ieee80211at the moment is not compilable, because this Kernel replaced the "old net_device API" structure with a new one called "net_device_ops". http://trac.aircrack-ng.org/ticket/650 Code: sudo mkdir /usr/src/drivers cd /usr/src/drivers sudo wget http://www.jano.netsons.org/wardiving/driver-patch/rtl8187_linux_26.1010-intrepid-jaunty.zip sudo unzip rtl8187_linux_26.1010-intrepid-jaunty.zip cd rtl8187_linux_26.1010.0622.2006/ sudo patch -Np1 -i rtl8187_2.6.27.patch sudo make sudo make install­ For loaded/use your ALFA-AWUS036H, use this command: Code: sudo modprobe r8187 Alternative link for download driver: http://jano.homelinux.net/wardriving/driver-patch/rtl8187_linux_26.1010-intrepid-jaunty.zip

Code: sudo rmmod rtl8187 sudo rmmod mac80211 echo "blacklist rtl8187" | sudo tee -a /etc/modprobe.d/blacklist.conf echo "blacklist mac80211" | sudo tee -a /etc/modprobe.d/blacklist.conf echo "blacklist r8187" | sudo tee -a /etc/modprobe.d/blacklist.conf echo "blacklist rt2870sta" | sudo tee -a /etc/modprobe.d/blacklist.conf echo "blacklist rt3070sta" | sudo tee -a /etc/modprobe.d/blacklist.conf echo "blacklist rt2800usb" | sudo tee -a /etc/modprobe.d/blacklist.conf sudo mkdir /usr/src/drivers cd /usr/src/drivers sudo wget http://download.aircrack-ng.org/drivers/compat-wireless-aircrack-alfa036h-050nh.tar.bz2 sudo tar jxvf compat-wireless-aircrack-alfa036h-050nh.tar.bz2 cd compat-wireless-aircrack-alfa036h-050nh sudo make sudo make install sudo make unload ­- At this point, to use the driver RTL8187 with ALFA-­AWUS036H, load the appropriate module with this command: Code: sudo modprobe rtl8187 ­- While, for use of the new ALFA-...

NOTE: For surfing Internet with ALFA-AWUS050NH on Ubuntu Jaunty with rt2870sta driver, you must use the Kernel "2.6.28-11-generic #42-Ubuntu", without change or updates the drivers modules. NOTE: The tutorial is not related to Ubuntu karmic. Driver RTL8187/Stacks-­mac80211 (ref. ALFA-­AWUS036h) ­- These drivers, for surfing Internet, are more stable than r8187, and fully compatible with Network-Manager 0.7 installed by default on Ubuntu 9.04. Network-Manager 0.7 installed by default on Ubuntu 9.04. ­- Supports all encryption without problems. (OPEN, WEP and WPA/WPA2) ­- With Compat-Wireless, the "injection" working, but for support “Fragmentation attack” (opt. -5) you need to install one patch. - The RX sensitivity and packets injection is less, related to drivers r8187. Driver r8187/Stacks-ieee80211 (ref. ALFA-AWUS036h) - This driver is recommended for use with the Suite of Aircrack-ng, but not particularly suitable for Internet connections, as less stable and disc...

Latest version of Airgraph-ng and Airoscript were included in this release. Important note: It does not support peek drivers. Important note 2: It is not in sync with our subversion (the repository works fine in read mode but commit doesn't work anymore; we're working on the issue) meaning that the sources are svn trunk plus a few patches. Changelog: •airserv-ng: Now works fine between 32 and 64bit OSes. •wesside-ng: Fixed some endianness bugs •airodump-ng-oui-update: Make sure the user is root when updating the file. •airmon-ng: Updated iw download link (0.9.17). •All: Fixed compilation with some gcc. •patches: Added missing patches from patches.aircrack-ng.org: mac80211_2.6.28-rc4-wl_frag+ack_v3.patch •manpage: Updated aireplay-ng manpage. •INSTALLING: Removed (now) useless requirement for OSX installation. •GUI (windows): Fixed 2nd selection of a capture file.

The goal of SliTaz is to have a GNU/Linux distro working in memory (RAM). Installable to a hard disk, with good support for French language web, it offers reliability, high performance and PC recycling. SliTaz boots with Syslinux and provides more than 200 Linux commands, the LightTPD web server, SQLite database, rescue tools, IRC client, SSH client/server powered by Dropbear, X window system, JWM (Joe's Window Manager), gFTP, Geany IDE, Mozilla Firefox, Alsaplayer, Gparted, a sound file editor and much more. Summary of What Is Included: ■Aircrack-ng 1.0 final including sqlite airolib-ng support ■madwifi-hal r4032 patched for injection (The new official HAL (0.10.5.6) supports AR5007EG (and AR5006EG) on 32 and 64 bit systems.) ■madwifi-ng r4032 patched for injection ■rt73 (ASPj rt73-k2wrlz-3.0.2) patched for injection ■r8187 (rtl8187_linux_26.1010 for RTL8187L) patched for injection ■Linux kernel 2.6.30.6 and related wireless drivers. ■Includes Compat-wireless drivers from November...

And another world premiere from me. First implementation of the Fragmentation Attack on Linux. This attack needs a special driver and card, that is able to handle the IEEE802.11 fragmentation correctly, your driver may not work or may need to be updated or modified. The output of this tool is a file in the aircrack-ng keystream format (.xor). The output can be used in the same way like the output of the chopchop attack in aireplay-ng. With that keystream you can build an ARP packet (arpforge-ng or packetforge-ng). This packet can then be injected into the target wifi system, generating either answers and/or fowarded packets increasing the IV count. For an example attack, see the README in the tarball. afrag has already been integrated into aireplay-ng, best idea is to get the aircrack-ng SVN version for the newest fragmentation attack code. afrag-0.1.tar.bz2

This is world's first fully functional code to enable fake authentication on networks using Shared Key Authentication. You do NOT need to know the key to authenticate, all you need is a keystream that has been chopped with aireplay-ng's chopchop attack. Hirte, another developer from the aircrack-ng community successfully included this code into the aircrack suite. Fixed in Version 0.2: •Show error when network does not use Shared Key Authentication •Get Capability Field from Beacon Frame. (Using the standard capabilities failed for some APs) ska-0.2.tar.bz2

This is the first Prism2 USB driver that was able to inject packets. I made this before Devine had its own one. But i never released it to the public, however. Instead of his driver, this one seems to be very stable (was able to crack a whole lot of WEPs with aireplay). It shares the same issue with Devine's driver, it doesn't inject on kernels newer than 2.6.11. I can't give any support or help for this since I gave my prism away. Sorry. linux-wlan-ng-0.2.3-k2wrlz-usbrawsend.tar.bz2

The new MDK3 uses the osdep injection library from the www.aircrack-ng.org project. The Linux-dependant includes have been removed, mdk3 compiles and runs on FreeBSD and even Windows (Cygwin). For Windows you need special drivers, a possibly illegal DLL file and the cygwin environment. Please see the aircrack-ng website for details about Packet Injection in Windows. MDK3 works on the new mac80211 stack. If you are a Linux user, just make, make install and have fun. If you are a FreeBSD user, do the same, and report back to me, if it works correctly there. If you are a Windows user, good luck, but expect no support from me. MDK3 is licenced under GPLv2. Features: •Bruteforce MAC Filters •Bruteforce hidden SSIDs (some small SSID wordlists included) •Probe networks to check if they can hear you •intelligent Authentication-DoS to freeze APs (with success checks) •FakeAP - Beacon Flooding with channel hopping (can crash NetStumbler and some buggy drivers) •Disconnect everything (aka AMOK-...

•Prism header can be toggled via iwpriv, no automatic changes which screwed up packet captures! •MAC changing supported •Support for Fragmentation Attack Fragmentation support is now considered stable. For further details on the fragmentation attack see the paper from Andrea Bitteau: http://toorcon.org/2005/slides/abittau/ 1.5.0 version has some important fixes for kernel version 2.6.19 and above. The serialmonkey CVS repository updated its driver from a new RaLink legacy one. Version 1.6.0 is the modification of this driver with fragmentation support, MAC changing and prism headers enabled by default. This driver seems to fix some threading, some SMP and some endianness issues. So it should be more stable than previous releases. Version 1.6.1 works for 2.6.22 kernels and comes with some more stability improvements. Version 1.6.2 with a new base version from serialmonkey CVS, all the patches from the previous version and support for 2.6.26 kernel. Version 1.6.3 adds kernel 2.6.27 compa...

•Support for Fragmentation Attack •Interface is called rausb0 instead of wlan0 to prevent some tools incorrectly detecting it as wlanng or hostap driver •Injection speed can be selected with iwconfig rate command. The default speed is 54 MBit. You may want to lower it to 1 MBit before injection with iwconfig rausb0 rate 1M IMPORTANT! Version 3.0.0 is a new fork from the former serialmonkey CVS. It has fixes for 2.6.24 and 2.6.25 and does not need setting a MAC Address before bringing the interface up. This version includes all the enhancement of the 2.0 series of this driver. If you unplug the card while its still in use, it may crash your system. So close all applications accessing it, bring the interface down and then remove the device. You may have waited for this: Version 3.0.1 has an updated base version from serialmonkey CVS. It is patched with all the features of 3.0.0 and it has been successfully tested with 2.6.26 vanilla kernel. Version 3.0.2 provides kernel version 2.6.27 c...

This is based on a driver made for testing purposes called ipwraw. It allows raw packet Tx/Rx with the Intel PRO/Wireless 3945ABG adapter, it's raw mode only and can't be used for normal connections to the internet. ipwraw doesn't have wireless extensions, so this modification adds some to make it easier to work with programs like aircrack-ng, kismet, mdk, ... New in ipwraw-ng 2.3.4: •Added compatibility fixes for recent kernels (2.6.23 and newer) •Fixed bug when setting 5.5 Mb/s rate with iwconfig •Fixed bugs (I hope) in Makefile - it would report that old firmware versions were adequate and also had some cosmetic glitches •Added set TxPower Wireless Extension. Now TxPower can be set using iwconfig INTERFACE txpower TXPOWER (INTERFACE is normally wifi0, or eth0; TXPOWER is a the value you want to set, min=-12 and max=16) This version includes some fixes ported from ipw3945 driver. It should be more stable now... Default speed was left at 54 MBit, you may want to lower it t...

- Recently emerged the New ALFA-AWUS036H v.2 (1.000mW), and these are the tests. TEST WITH NETSTUMBLER 1) usb da 100mW chipset railink 2) usb da 200mW chipset railink rt73 3) intel 2200 b/g con connettore esterno rp-sma 4) Alfa-AWUS036H 500mW 5) New Alfa-AWUS036H V2 da 1.000mW

BackTrack 4 Final is out and along with this release come some exciting news, updates, and developments. BackTrack 4 has been a long and steady road, with the release of a beta last year, we decided to hold off on releasing BackTrack 4 Final until it was perfected in every way shape and form. With this release includes a new kernel, a larger and expanded toolset repository, custom tools that you can only find on BackTrack, and more importantly, fixes to all (well, most..) major bugs that we knew of. This release we received an overwhelming support from the community and we are grateful to everyone that has contributed to the success of this release.