Skip to main content

the 0.9.1 beta yellowsn0w 3G unlock application

BASICS

The unlock works exclusively with baseband 02.28.00. This baseband is provided by the latest firmware update (2.2) from Apple. You’ll need to upgrade to this release using iTunes and then use QuickPwn to activate etc. There are plenty of tutorials about this on iclarified, bigboss, and other established tutorial sites. Because it works on 02.28.00, it is available to everyone on the planet. This means we don’t need to unnecessarily expose holes in earlier basebands, which is an important concern.
The application is a small daemon that is launched on boot. It injects the payload at boot and also whenever there is a baseband reset. You won’t notice anything about it other than that your third-party sim now works. It’s a small program and unobtrusive. There is no GUI (this is by design).
You can add the application using the sources outlined below (coming soon). There are Cydia and Installer sources available, so use whichever you are comfortable using.
yellowsn0w is completely removable through Cydia, the command line, and iTunes.
DETAILS

There is a known issue with SIM cards that have STK (SIM Toolkit) application menus. These menus are usually items such as “top up” “get credit” “lotto numbers” etc. These menu items confuse the application sometimes. Removing and reinserting the SIM once after reboot (give it about 10 secs 60 seconds (with v0.9.1) after you see the slide to unlock widget) fixes this issue. We’re working on a better fix.
For those of you using SIM cards without STK menus, the application has some optional arguments that will make the unlock much faster for you. So either experiment on your own (use “yellowsn0w -h” for usage) or wait for a customization writeup.
After you install yellowsn0w via Cydia, you should return to the Cydia main menu then reboot your iPhone with the 3rd party SIM installed. Wait for the slide to unlock screen, then wait 10 or 15 secs more. If you don’t see your carrier name pop up, then remove your SIM, reinsert it, and wait 10 secs more. This is the step we’ll be working on eliminating next.
RANDOM

The application is version 0.9 0.9.1. This is considered beta software, you use it at your own risk. You know the score.
The application is released on a non-commerical basis. Please do not accept pirates and scummy ripoffs of this software. We license this software for single use and in a non-commerical environment (meaning you can’t charge for it). The techniques and methods used are not to be used by third party companies. We are watching you Jody…we won’t be so forgiving this time.
Direct linking to the repository URLs is prohibited, please only link to this post. We will be checking referers.
Happy 2009 and enjoy!
The iPhone 3G is used all over the world with all sorts of SIM cards, and we almost certainly will see untested and unexpected situations. If the soft unlock doesn’t work for you on day 1 (literally day 1, of 2009!) then please don’t panic or be impatient. This is new territory for everyone, so enjoy the ride as much as you can :)

RELEASE INFO


Cydia source: http://apt9.yellowsn0w.com/
Installer repo: http://i.yellowsn0w.com/
UPDATES

Soon you’ll see yellowsn0w 0.9.1 in the repos. It uses a much longer delay to let your SIM card initialize. If you have problems with 0.9.0, try this one and wait a full minute after you see homescreen, then reinsert sim card. We need both success and failure reports to tune this across the world, so please be patient (but please also report result!)
If you are in the U.S. and are trying this with T-Mobile, you must turn off the 3G switch in Settings. Also if you are good with the command line, you can make it much easier by adding the line -q right after the /usr/bin/yellowsn0w line in /System/Library/LaunchDaemons/org.iphone-dev.yellowsn0w.plist (that’s and advanced tip, hopefully someone will make a boosprefs type of tool for it)
No PIN support yet. Remember how we said this was beta? Well we’re still working out the flow for SIMs with PINs enabled. Please disable any PIN you may have on that SIM before trying yellowsn0w, for now.
The unlock will silently quit on anything other than baseband 02.28.00. It detects the wrong version and just quits to avoid any damage. Please double check your Modem Firmware setting in Settings->General->About.

Comments

Popular posts from this blog

Test New ALFA-AWUS036H v.2 (1.000mW) VS ALFA-AWUS036H v.1 (500mW)

- Recently emerged the New ALFA-AWUS036H v.2 (1.000mW), and these are the tests. TEST WITH NETSTUMBLER 1) usb da 100mW chipset railink 2) usb da 200mW chipset railink rt73 3) intel 2200 b/g con connettore esterno rp-sma 4) Alfa-AWUS036H 500mW 5) New Alfa-AWUS036H V2 da 1.000mW

Creating A Cheap Bluetooth Sniffer

Many papers and posts on internet forums have commented on the success of turning normal everyday bluetooth USB dongles ($10), into their more powerful counterparts that allow the capturing of packets from the airwaves. These more powerful USB dongles are usually sold at a much higher price ($10,000) together with the software to drive and control these devices. The problems associated with BlueTooth sniffing You cant simply just purchase the dongle with the alternate firmware. There is next to no real opensource packet capture program for the bluetooth protocol. Hardware & Limitations Chipsets: Whats the difference? The chipset of the Bluetooth USB Dongles are very important. Broadcom chipsets are cheap hardware and are deemed unsuitable devices for this paper. But unfortunalty nowadays, every manufacturer seems to prefer putting these chips in their products compared to the more reliable Cambridge Silicon Radio (CSR) chipset. If your lucky enough to find a dongle with a CSR chips...

ALFA-­AWUS036H & ALFA-­AWUS050NH INSTALLING/UPDATING DRIVERS RTL8187, r8187, RT2800usb on UBUNTU

NOTE: For surfing Internet with ALFA-AWUS050NH on Ubuntu Jaunty with rt2870sta driver, you must use the Kernel "2.6.28-11-generic #42-Ubuntu", without change or updates the drivers modules. NOTE: The tutorial is not related to Ubuntu karmic. Driver RTL8187/Stacks-­mac80211 (ref. ALFA-­AWUS036h) ­- These drivers, for surfing Internet, are more stable than r8187, and fully compatible with Network-Manager 0.7 installed by default on Ubuntu 9.04. Network-Manager 0.7 installed by default on Ubuntu 9.04. ­- Supports all encryption without problems. (OPEN, WEP and WPA/WPA2) ­- With Compat-Wireless, the "injection" working, but for support “Fragmentation attack” (opt. -5) you need to install one patch. - The RX sensitivity and packets injection is less, related to drivers r8187. Driver r8187/Stacks-ieee80211 (ref. ALFA-AWUS036h) - This driver is recommended for use with the Suite of Aircrack-ng, but not particularly suitable for Internet connections, as less stable and disc...