Skip to main content

What is a Femtocell ?

A femtocell is a small cellular base station designed for use in residential or small business environments. It connects to the service provider’s network via broadband (such as DSL or cable) and typically supports 2 to 5 mobile phones in a residential setting. A femtocell allows service providers to extend service coverage inside of your home - especially where access would otherwise be limited or unavailable - without the need for expensive cellular towers. It also decreases backhaul costs since it routes your mobile phone traffic through the IP network. A femtocell is sometimes referred to as a “home base station”, “access point base station”, “3G access point”, “small cellular base station” and “personal 2G-3G base station”.

Popular posts from this blog

Test New ALFA-AWUS036H v.2 (1.000mW) VS ALFA-AWUS036H v.1 (500mW)

- Recently emerged the New ALFA-AWUS036H v.2 (1.000mW), and these are the tests. TEST WITH NETSTUMBLER 1) usb da 100mW chipset railink 2) usb da 200mW chipset railink rt73 3) intel 2200 b/g con connettore esterno rp-sma 4) Alfa-AWUS036H 500mW 5) New Alfa-AWUS036H V2 da 1.000mW

ALFA-­AWUS036H & ALFA-­AWUS050NH INSTALLING/UPDATING DRIVERS RTL8187, r8187, RT2800usb on UBUNTU

NOTE: For surfing Internet with ALFA-AWUS050NH on Ubuntu Jaunty with rt2870sta driver, you must use the Kernel "2.6.28-11-generic #42-Ubuntu", without change or updates the drivers modules. NOTE: The tutorial is not related to Ubuntu karmic. Driver RTL8187/Stacks-­mac80211 (ref. ALFA-­AWUS036h) ­- These drivers, for surfing Internet, are more stable than r8187, and fully compatible with Network-Manager 0.7 installed by default on Ubuntu 9.04. Network-Manager 0.7 installed by default on Ubuntu 9.04. ­- Supports all encryption without problems. (OPEN, WEP and WPA/WPA2) ­- With Compat-Wireless, the "injection" working, but for support “Fragmentation attack” (opt. -5) you need to install one patch. - The RX sensitivity and packets injection is less, related to drivers r8187. Driver r8187/Stacks-ieee80211 (ref. ALFA-AWUS036h) - This driver is recommended for use with the Suite of Aircrack-ng, but not particularly suitable for Internet connections, as less stable and disc...

Packetforge-ng

The purpose of packetforge-ng is to create encrypted packets that can subsequently be used for injection. You may create various types of packets such as arp requests, UDP, ICMP and custom packets. The most common use is to create ARP requests for subsequent injection. To create an encrypted packet, you must have a PRGA (pseudo random genration algorithm) file. This is used to encrypt the packet you create. This is typically obtained from aireplay-ng chopchop or fragmentation attacks.