Skip to main content

ALFA AWUS050NH

The AWUS050NH IEEE 802.11a/b/g/n Wireless USB adapter provides users to launch IEEE 802.11a/b/g/n wireless network at 150/300 Mbps in the 2.4GHz/5.8GHz band, which is also compatible with IEEE 802.11a/b/g wireless devices at 11/54 Mbps. You can configure AWUS050NH with ad-hoc mode to connect to other 2.4GHz/5.8GHz wireless computers, or with Infrastructure mode to connect to a wireless Access Point or Router for accessing to Internet.
AWUS050NH includes a convenient Utility for scanning available networks and saving preferred networks that users usually connected with. Security encryption can also be configured by this utility.

Features:
Compatible with IEEE 802.11n draft 3.0, 802.11a/b/g wireless standards
2.4GHz and 5.8GHz frequency band, MIMO (Multiple Input Multiple Output)
Complies with Universal Serial Bus Rev. 2.0 specifications
High speed transfer TX data rate up to 150 Mbps
High speed transfer RX data rate up to 300 Mbps
Supports WPS by S/W
Supports wireless data encryption with 64/128-bit WEP, WPA, WPA2, TKIP, AES
Wide Range coverage
Compliant with FCC Part 15.247 for US, ETS 300 328 for Europe
Supports driver for Windows 2000, XP 32/64, Vista 32/64, and Linux (2.4.x/2.6.x), and Mac (10.4.x/10.5.x) Power PC& PC.

Specifications
Category Item Description
Standards Wireless: IEEE 802.11a/b/g/n
USB 2.0 standard
Data Rate 802.11b: Up to 11 Mbps
802.11g: 54Mbps
802.11n: 108Mbps

Product General
Dimension 83x56mm
Interface Mini USB connector

Physical Spec.
Antenna Type 1 X 2.4/5GGHz SMA connecter and patch x1
One LED Power/Status: steady green
Wireless act: flash
Frequency
Range 2412 ~ 2462 MHz (N.A) 2412 ~ 2472`MHz (EU) 2412 ~ 2482`MHz (Japan)

IEEE802.11a: 5150 MHz – 5250 MHz (Japan) 5150 MHz – 5350 MHz / 5470 MHz－5725 MHz (Europe) 5150 MHz – 5350 MHz / 5725 MHz－5850 MHz (USA) 2412 ~ 2484 MHz (Japan)

Hardware
Opt. Channel 1 ~ 11 channels (North America), 1 ~ 13 channels (General Europe), 1 ~ 14 channels (Japan)
IEEE802.11a 4 Channels (Japan), 19 Channels (Europe), 13 Channels (USA)

Ralink RT2770F Chipset , 1x TX 2x RX (driver RT2780)
One antenna INTERNAL + EXTERNAL RP-SMA
Maximum TX power:
500mW at 2.4ghz
150mW at 5ghz

Comments

Post a Comment

Popular posts from this blog

ALFA-­AWUS036H & ALFA-­AWUS050NH INSTALLING/UPDATING DRIVERS RTL8187, r8187, RT2800usb on UBUNTU

NOTE: For surfing Internet with ALFA-AWUS050NH on Ubuntu Jaunty with rt2870sta driver, you must use the Kernel "2.6.28-11-generic #42-Ubuntu", without change or updates the drivers modules. NOTE: The tutorial is not related to Ubuntu karmic. Driver RTL8187/Stacks-­mac80211 (ref. ALFA-­AWUS036h) ­- These drivers, for surfing Internet, are more stable than r8187, and fully compatible with Network-Manager 0.7 installed by default on Ubuntu 9.04. Network-Manager 0.7 installed by default on Ubuntu 9.04. ­- Supports all encryption without problems. (OPEN, WEP and WPA/WPA2) ­- With Compat-Wireless, the "injection" working, but for support “Fragmentation attack” (opt. -5) you need to install one patch. - The RX sensitivity and packets injection is less, related to drivers r8187. Driver r8187/Stacks-ieee80211 (ref. ALFA-AWUS036h) - This driver is recommended for use with the Suite of Aircrack-ng, but not particularly suitable for Internet connections, as less stable and disc...
Post a Comment
Read more

Sniffing SSL traffic using MITM attack / ettercap, fragrouter, webmitm and dnsspoof.

Before reading on this guide is for educational purposes only. I take no responsibility from what people do with this info. First thing is to get fragrouter. I don't know if you can use other tools provided with the backtrack, there are 100 ways to skin a cat and this is just my way. http://packetstormsecurity.nl/UNIX/IDS/nidsbench/fragrouter.html There are lots of things that you can do with fragrouter but we are going to use fragrouter to setup IP forwarding. We do this with this command : Code: fragrouter -B1Squash that window and put it to one side. Now open another shell and we will start dnsspoof with this command Code: dnsspoof -i ath0 (or whatever network interface you are using)Again put that window to one side and lets load up webmitm. Webmitm will issue our ssl cert to the victim so we can decrypt the traffic we capture. Start webmitm by typing Code: webmitm -dNow we can start the arp spoof. To start ettercap type Code: ettercap -T -M arp:remote /router addy/ /victim a...
Post a Comment
Read more

Test New ALFA-AWUS036H v.2 (1.000mW) VS ALFA-AWUS036H v.1 (500mW)

- Recently emerged the New ALFA-AWUS036H v.2 (1.000mW), and these are the tests. TEST WITH NETSTUMBLER 1) usb da 100mW chipset railink 2) usb da 200mW chipset railink rt73 3) intel 2200 b/g con connettore esterno rp-sma 4) Alfa-AWUS036H 500mW 5) New Alfa-AWUS036H V2 da 1.000mW
Post a Comment
Read more