Skip to main content

How to Protect Your Wi-Fi Network from the WPA Hack

WEP Wi-Fi security has been known as an easy-to-crack security protocol for a while now, which is why it was superseded by the more secure Wi-Fi Protected Access (WPA) standard. But now a PhD candidate studying encryption has found an exploit in the WPA standard that would allow a hacker to "send bogus data to an unsuspecting WiFi client," completely compromising your Wi-Fi security and opening your network to all sorts of hacking. Lucky for you, it's not terribly difficult to protect yourself against the new exploit.

The key: Just log into your router, switch off Temporal Key Integrity Protocol (TKIP) as an encryption mode, and use Advanced Encryption System (AES) only. TKIP is the only protocol that the hack applies to, so switching to AES-only will ensure that your Wi-Fi network is safe again. It's quick and easy, so do yourself a favor and make the adjustment now so you don't run into any problems in the future.
via lifehacker.com

Comments

Popular posts from this blog

ALFA-­AWUS036H & ALFA-­AWUS050NH INSTALLING/UPDATING DRIVERS RTL8187, r8187, RT2800usb on UBUNTU

NOTE: For surfing Internet with ALFA-AWUS050NH on Ubuntu Jaunty with rt2870sta driver, you must use the Kernel "2.6.28-11-generic #42-Ubuntu", without change or updates the drivers modules. NOTE: The tutorial is not related to Ubuntu karmic. Driver RTL8187/Stacks-­mac80211 (ref. ALFA-­AWUS036h) ­- These drivers, for surfing Internet, are more stable than r8187, and fully compatible with Network-Manager 0.7 installed by default on Ubuntu 9.04. Network-Manager 0.7 installed by default on Ubuntu 9.04. ­- Supports all encryption without problems. (OPEN, WEP and WPA/WPA2) ­- With Compat-Wireless, the "injection" working, but for support “Fragmentation attack” (opt. -5) you need to install one patch. - The RX sensitivity and packets injection is less, related to drivers r8187. Driver r8187/Stacks-ieee80211 (ref. ALFA-AWUS036h) - This driver is recommended for use with the Suite of Aircrack-ng, but not particularly suitable for Internet connections, as less stable and disc...

Sniffing SSL traffic using MITM attack / ettercap, fragrouter, webmitm and dnsspoof.

Before reading on this guide is for educational purposes only. I take no responsibility from what people do with this info. First thing is to get fragrouter. I don't know if you can use other tools provided with the backtrack, there are 100 ways to skin a cat and this is just my way. http://packetstormsecurity.nl/UNIX/IDS/nidsbench/fragrouter.html There are lots of things that you can do with fragrouter but we are going to use fragrouter to setup IP forwarding. We do this with this command : Code: fragrouter -B1Squash that window and put it to one side. Now open another shell and we will start dnsspoof with this command Code: dnsspoof -i ath0 (or whatever network interface you are using)Again put that window to one side and lets load up webmitm. Webmitm will issue our ssl cert to the victim so we can decrypt the traffic we capture. Start webmitm by typing Code: webmitm -dNow we can start the arp spoof. To start ettercap type Code: ettercap -T -M arp:remote /router addy/ /victim a...

Test New ALFA-AWUS036H v.2 (1.000mW) VS ALFA-AWUS036H v.1 (500mW)

- Recently emerged the New ALFA-AWUS036H v.2 (1.000mW), and these are the tests. TEST WITH NETSTUMBLER 1) usb da 100mW chipset railink 2) usb da 200mW chipset railink rt73 3) intel 2200 b/g con connettore esterno rp-sma 4) Alfa-AWUS036H 500mW 5) New Alfa-AWUS036H V2 da 1.000mW