Skip to main content

WinPwn 2.0.0.3 Released: Fixes iPwner Crashing issue and 16xx errors

WinPwn 2.0.0.3 has just been released. If you were facing crashing issues with iPwner or 16xx errors then you you might want to check out the latest version as cnw, the iPhone Hacker credited for porting iPhone Dev Team's Pwnage Tool 2.0 (Mac only) to Windows claims that they have been fixed.

You can find all the details of WinPwn 2.0.0.3 after the jump.

The initial release was affected by an issue that caused the iPwner component to crash. It appears that the issue has been resolved in the latest version.

WinPwn 2.0.0.3 has also resolved the 16xx errors that iPhone Hacks reader, hms90832, had encountered.

Here are the instructions provided with the latest release:

You must do a full uninstall of winpwn before installing the new version.
Make sure you have the latest version of iTunes (Currently 7.7).
WinPwn uses 300MB of ram at peak due to the ipsw being extracted in memory.
You must first click browse and load an IPSW to use WinPwn.
For 2.0 only the *5A347_Restore.ipsw files are valid. The 345 image will not work.
If you see “Failed to load image catalog/payload catalog”, ignore it.
If you already have service with AT&T do not activate or install Youtube Fix.
It also fixes the following issues:

Cydia/XP/Writing root FS bug.
Failed to remove ipsw directory after a ipswBuild failure.
iPwner now only accepts custom ipsws.
Remove 345 ipsw support. WinPwn only supports 347 2.0 ipsw's.
Various other fixes.
Cnw is also planning to release the following features in the next release:

Parition resizer
Auto updater
DFU Helper function/Wizard mode
As always do remember, hacking your iPhone is at your own risk and don't forget its always a good idea to backup your iPhone.

You can download WinPwn 2.0.0.3 from WinPwn's blog to ensure you download the latest version.

If you still run into problems with the latest version then you can checkout this guide step-by-step guide to pwn the first generation iPhone running iPhone firmware 2.0 using Windows.

Comments

Popular posts from this blog

Test New ALFA-AWUS036H v.2 (1.000mW) VS ALFA-AWUS036H v.1 (500mW)

- Recently emerged the New ALFA-AWUS036H v.2 (1.000mW), and these are the tests. TEST WITH NETSTUMBLER 1) usb da 100mW chipset railink 2) usb da 200mW chipset railink rt73 3) intel 2200 b/g con connettore esterno rp-sma 4) Alfa-AWUS036H 500mW 5) New Alfa-AWUS036H V2 da 1.000mW

Creating A Cheap Bluetooth Sniffer

Many papers and posts on internet forums have commented on the success of turning normal everyday bluetooth USB dongles ($10), into their more powerful counterparts that allow the capturing of packets from the airwaves. These more powerful USB dongles are usually sold at a much higher price ($10,000) together with the software to drive and control these devices. The problems associated with BlueTooth sniffing You cant simply just purchase the dongle with the alternate firmware. There is next to no real opensource packet capture program for the bluetooth protocol. Hardware & Limitations Chipsets: Whats the difference? The chipset of the Bluetooth USB Dongles are very important. Broadcom chipsets are cheap hardware and are deemed unsuitable devices for this paper. But unfortunalty nowadays, every manufacturer seems to prefer putting these chips in their products compared to the more reliable Cambridge Silicon Radio (CSR) chipset. If your lucky enough to find a dongle with a CSR chips...

ALFA-­AWUS036H & ALFA-­AWUS050NH INSTALLING/UPDATING DRIVERS RTL8187, r8187, RT2800usb on UBUNTU

NOTE: For surfing Internet with ALFA-AWUS050NH on Ubuntu Jaunty with rt2870sta driver, you must use the Kernel "2.6.28-11-generic #42-Ubuntu", without change or updates the drivers modules. NOTE: The tutorial is not related to Ubuntu karmic. Driver RTL8187/Stacks-­mac80211 (ref. ALFA-­AWUS036h) ­- These drivers, for surfing Internet, are more stable than r8187, and fully compatible with Network-Manager 0.7 installed by default on Ubuntu 9.04. Network-Manager 0.7 installed by default on Ubuntu 9.04. ­- Supports all encryption without problems. (OPEN, WEP and WPA/WPA2) ­- With Compat-Wireless, the "injection" working, but for support “Fragmentation attack” (opt. -5) you need to install one patch. - The RX sensitivity and packets injection is less, related to drivers r8187. Driver r8187/Stacks-ieee80211 (ref. ALFA-AWUS036h) - This driver is recommended for use with the Suite of Aircrack-ng, but not particularly suitable for Internet connections, as less stable and disc...