Alfa awus046n IEEE 802.11n

USB device http://dplanet.biz/alfa.com/product_info.php?cPath=159_177&products_id=403

Standards IEEE 802.11n draft, IEEE 802.11b, IEEE 802.11g
Receiver Sensitivity 11Mbps -90dBm / 54Mbps -78dBm / 300Mbps -70dBm
Output power 16 – 18 dbm (typical)
Range Coverage Indoor 30~50meters

This is a pretty cheap toy, about 40 euro shipping included for EU. It's not fully supported on linux yet, but as you can see from the rt2x00 Project, the aim is to have also packet injection working from a vanilla kernel.

Range coverage most likely is while using 802.11n.

Comments

Test New ALFA-AWUS036H v.2 (1.000mW) VS ALFA-AWUS036H v.1 (500mW)

- Recently emerged the New ALFA-AWUS036H v.2 (1.000mW), and these are the tests. TEST WITH NETSTUMBLER 1) usb da 100mW chipset railink 2) usb da 200mW chipset railink rt73 3) intel 2200 b/g con connettore esterno rp-sma 4) Alfa-AWUS036H 500mW 5) New Alfa-AWUS036H V2 da 1.000mW

ALFA-AWUS036H & ALFA-AWUS050NH INSTALLING/UPDATING DRIVERS RTL8187, r8187, RT2800usb on UBUNTU

NOTE: For surfing Internet with ALFA-AWUS050NH on Ubuntu Jaunty with rt2870sta driver, you must use the Kernel "2.6.28-11-generic #42-Ubuntu", without change or updates the drivers modules. NOTE: The tutorial is not related to Ubuntu karmic. Driver RTL8187/Stacks-mac80211 (ref. ALFA-AWUS036h) - These drivers, for surfing Internet, are more stable than r8187, and fully compatible with Network-Manager 0.7 installed by default on Ubuntu 9.04. Network-Manager 0.7 installed by default on Ubuntu 9.04. - Supports all encryption without problems. (OPEN, WEP and WPA/WPA2) - With Compat-Wireless, the "injection" working, but for support “Fragmentation attack” (opt. -5) you need to install one patch. - The RX sensitivity and packets injection is less, related to drivers r8187. Driver r8187/Stacks-ieee80211 (ref. ALFA-AWUS036h) - This driver is recommended for use with the Suite of Aircrack-ng, but not particularly suitable for Internet connections, as less stable and disc...

Packetforge-ng

The purpose of packetforge-ng is to create encrypted packets that can subsequently be used for injection. You may create various types of packets such as arp requests, UDP, ICMP and custom packets. The most common use is to create ARP requests for subsequent injection. To create an encrypted packet, you must have a PRGA (pseudo random genration algorithm) file. This is used to encrypt the packet you create. This is typically obtained from aireplay-ng chopchop or fragmentation attacks.

Wireless Communications

Search This Blog