Skip to main content

LTE-Advanced = IMT-Advanced = 4G(or 5G?)

The 3GPP TSG RAN workshop on IMT-Advanced was held (in the week after the RAN WG meetings) on April 7-8, 2008 in Shenzhen, China hosted by ZTE Corporations. The main conclusions from the workshop are:

LTE Advanced shall be an evolution of LTE.
o LTE terminal shall be supported in LTE-advanced networks.
o An LTE-Advanced terminal can work in an LTE part of the network.
o Primary focus of LTE-Advanced is low mobility users.
All requirements/targets in TR25.913 apply to LTE-Advanced.LTE-Advanced requirements shall fulfill IMT-Advanced requirements within the ITU-R time plan
For LTE-Advanced:
o Same inter-RAT interworking capability with at least same performance as in LTE Release 8
o Intra-RAT handover performance shall be same or better than LTE Release 8
As a way forward for LTE-Advanced it was agreed:
o TSG RAN email reflector for LTE-Advanced will be established (the new reflector is called 3GPP_TSG_RAN_LTE_ADVANCED and it is available since 21.04.2008)
§ Email discussions on LTE-Advanced requirements will be started on this reflector (moderator: Takehiro Nakamura, NTT DoCoMo, LTE-Advanced SI rapporteur).
o A new TR will be created (after the workshop it was decided to create TR 36.913 "Requirements for LTE-Advanced") to include LTE-Advanced requirements and updated by RAN WG meetings in May 2008 referring to structure of 25.913 and outcome of the workshop.(note: Allocation of the TR number 36.xyz was done after the workshop.)
o Review of the outcome of this workshop and kick-off of discussions about LTE-Advanced requirements and technical solutions in RAN WG meetings in May 2008 in Kansas City.The goal is to complete LTE-Advanced requirements at RAN #40 in Prague end of May 2008 according to agreed work plan (i.e. TR 36.913 will be provided to RAN #40). Source: 3g4g.blogspot.com

Popular posts from this blog

Test New ALFA-AWUS036H v.2 (1.000mW) VS ALFA-AWUS036H v.1 (500mW)

- Recently emerged the New ALFA-AWUS036H v.2 (1.000mW), and these are the tests. TEST WITH NETSTUMBLER 1) usb da 100mW chipset railink 2) usb da 200mW chipset railink rt73 3) intel 2200 b/g con connettore esterno rp-sma 4) Alfa-AWUS036H 500mW 5) New Alfa-AWUS036H V2 da 1.000mW

ALFA-­AWUS036H & ALFA-­AWUS050NH INSTALLING/UPDATING DRIVERS RTL8187, r8187, RT2800usb on UBUNTU

NOTE: For surfing Internet with ALFA-AWUS050NH on Ubuntu Jaunty with rt2870sta driver, you must use the Kernel "2.6.28-11-generic #42-Ubuntu", without change or updates the drivers modules. NOTE: The tutorial is not related to Ubuntu karmic. Driver RTL8187/Stacks-­mac80211 (ref. ALFA-­AWUS036h) ­- These drivers, for surfing Internet, are more stable than r8187, and fully compatible with Network-Manager 0.7 installed by default on Ubuntu 9.04. Network-Manager 0.7 installed by default on Ubuntu 9.04. ­- Supports all encryption without problems. (OPEN, WEP and WPA/WPA2) ­- With Compat-Wireless, the "injection" working, but for support “Fragmentation attack” (opt. -5) you need to install one patch. - The RX sensitivity and packets injection is less, related to drivers r8187. Driver r8187/Stacks-ieee80211 (ref. ALFA-AWUS036h) - This driver is recommended for use with the Suite of Aircrack-ng, but not particularly suitable for Internet connections, as less stable and disc...

Packetforge-ng

The purpose of packetforge-ng is to create encrypted packets that can subsequently be used for injection. You may create various types of packets such as arp requests, UDP, ICMP and custom packets. The most common use is to create ARP requests for subsequent injection. To create an encrypted packet, you must have a PRGA (pseudo random genration algorithm) file. This is used to encrypt the packet you create. This is typically obtained from aireplay-ng chopchop or fragmentation attacks.