Skip to main content

HD26200, 5-Mile 2.4GHz Outdoor Wireless Bridge Bundle Featuring Two (2) Ubiquiti Networks PowerStation2 dual polarity 2.4 GHz radios

HD26200
5-Mile 2.4GHz Outdoor Wireless Bridge Bundle Featuring Two (2) Ubiquiti Networks PowerStation2 dual polarity 2.4 GHz radios with POE adapters included. No Need for RF cables as the radios sit outside and connect using outdoor Cat5 cable.

Ubiquiti Networks PowerStation2 Bridge
The Highest Performing 2.4GHz Bridge for the money. Featuring Adaptive Antenna Polarity (AAP) Dual Polarity Technology from ubnt -ubiquiti


Twin 17dbi dual polarization version PowerStations the HD26200 wireless bridge offers a versatile open architecture 802.11 based outdoor wireless platform that can be used as PTP, Bridge, or a PMP bridge by adding an additional HD26158 for just an additional $159 connect three locations for under $480. It features exceptional radio and antenna design which allows links to be established over distances of 50km (30 miles*) and can provide significantly increased throughput (up to 50+Mbps TCP/IP) over other solutions in comparable environments. Additionally, Ubiquiti has made public Linux SDK and toolchain resources for developers.

* Distances are based on clear, unobstructed line of sight in ideal RF conditions. While remote sites with tall towers have achieved these distances a typical link in normal downtown area's with a higher noise floor is 5-8 miles; Clear Line of sight

Features:
Processor Specs Atheros AR2316 SOC, MIPS 4KC, 180MHz
Memory Information 16MB SDRAM, 4MB Flash
Networking Interface 2 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface
Wireless Approvals FCC Part 15.247, IC RS210
RoHS Compliance Yes
Outdoor Range (BaseStation Antenna Dependent) over 50km
Max Power Consumption 6.5 Watts
Power Supply 12V, 1A (12 Watts). Supply and injector included
Power Method Passive Power over Ethernet (pairs 4,5+; 7,8 return)
Operating Temperature -40C to 85C (System PCB optimized for hi-temp)
Operating Humidity 5 to 95% Condensing
Shock and Vibration ETSI300-019-1.4

Data sheet

Comments

Post a Comment

Popular posts from this blog

ALFA-­AWUS036H & ALFA-­AWUS050NH INSTALLING/UPDATING DRIVERS RTL8187, r8187, RT2800usb on UBUNTU

NOTE: For surfing Internet with ALFA-AWUS050NH on Ubuntu Jaunty with rt2870sta driver, you must use the Kernel "2.6.28-11-generic #42-Ubuntu", without change or updates the drivers modules. NOTE: The tutorial is not related to Ubuntu karmic. Driver RTL8187/Stacks-­mac80211 (ref. ALFA-­AWUS036h) ­- These drivers, for surfing Internet, are more stable than r8187, and fully compatible with Network-Manager 0.7 installed by default on Ubuntu 9.04. Network-Manager 0.7 installed by default on Ubuntu 9.04. ­- Supports all encryption without problems. (OPEN, WEP and WPA/WPA2) ­- With Compat-Wireless, the "injection" working, but for support “Fragmentation attack” (opt. -5) you need to install one patch. - The RX sensitivity and packets injection is less, related to drivers r8187. Driver r8187/Stacks-ieee80211 (ref. ALFA-AWUS036h) - This driver is recommended for use with the Suite of Aircrack-ng, but not particularly suitable for Internet connections, as less stable and disc...
Post a Comment
Read more

Sniffing SSL traffic using MITM attack / ettercap, fragrouter, webmitm and dnsspoof.

Before reading on this guide is for educational purposes only. I take no responsibility from what people do with this info. First thing is to get fragrouter. I don't know if you can use other tools provided with the backtrack, there are 100 ways to skin a cat and this is just my way. http://packetstormsecurity.nl/UNIX/IDS/nidsbench/fragrouter.html There are lots of things that you can do with fragrouter but we are going to use fragrouter to setup IP forwarding. We do this with this command : Code: fragrouter -B1Squash that window and put it to one side. Now open another shell and we will start dnsspoof with this command Code: dnsspoof -i ath0 (or whatever network interface you are using)Again put that window to one side and lets load up webmitm. Webmitm will issue our ssl cert to the victim so we can decrypt the traffic we capture. Start webmitm by typing Code: webmitm -dNow we can start the arp spoof. To start ettercap type Code: ettercap -T -M arp:remote /router addy/ /victim a...
Post a Comment
Read more

Test New ALFA-AWUS036H v.2 (1.000mW) VS ALFA-AWUS036H v.1 (500mW)

- Recently emerged the New ALFA-AWUS036H v.2 (1.000mW), and these are the tests. TEST WITH NETSTUMBLER 1) usb da 100mW chipset railink 2) usb da 200mW chipset railink rt73 3) intel 2200 b/g con connettore esterno rp-sma 4) Alfa-AWUS036H 500mW 5) New Alfa-AWUS036H V2 da 1.000mW
Post a Comment
Read more